Reposting after was mistakenly removed by mods (since resolved - Thanks)submitted by xSeq22x to CryptoCurrency [link] [comments]
A frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important.
For better formatting see https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b
CosmosCosmos is a heterogeneous network of many independent parallel blockchains, each powered by classical BFT consensus algorithms like Tendermint. Developers can easily build custom application specific blockchains, called Zones, through the Cosmos SDK framework. These Zones connect to Hubs, which are specifically designed to connect zones together.
The vision of Cosmos is to have thousands of Zones and Hubs that are Interoperable through the Inter-Blockchain Communication Protocol (IBC). Cosmos can also connect to other systems through peg zones, which are specifically designed zones that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Cosmos does not use Sharding with each Zone and Hub being sovereign with their own validator set.
For a more in-depth look at Cosmos and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Cosmos on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
PolkadotPolkadot is a heterogeneous blockchain protocol that connects multiple specialised blockchains into one unified network. It achieves scalability through a sharding infrastructure with multiple blockchains running in parallel, called parachains, that connect to a central chain called the Relay Chain. Developers can easily build custom application specific parachains through the Substrate development framework.
The relay chain validates the state transition of connected parachains, providing shared state across the entire ecosystem. If the Relay Chain must revert for any reason, then all of the parachains would also revert. This is to ensure that the validity of the entire system can persist, and no individual part is corruptible. The shared state makes it so that the trust assumptions when using parachains are only those of the Relay Chain validator set, and no other. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. The hope is to have 100 parachains connect to the relay chain.
For a more in-depth look at Polkadot and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Polkadot on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
AvalancheAvalanche is a platform of platforms, ultimately consisting of thousands of subnets to form a heterogeneous interoperable network of many blockchains, that takes advantage of the revolutionary Avalanche Consensus protocols to provide a secure, globally distributed, interoperable and trustless framework offering unprecedented decentralisation whilst being able to comply with regulatory requirements.
Avalanche allows anyone to create their own tailor-made application specific blockchains, supporting multiple custom virtual machines such as EVM and WASM and written in popular languages like Go (with others coming in the future) rather than lightly used, poorly-understood languages like Solidity. This virtual machine can then be deployed on a custom blockchain network, called a subnet, which consist of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance.
Avalanche was built with serving financial markets in mind. It has native support for easily creating and trading digital smart assets with complex custom rule sets that define how the asset is handled and traded to ensure regulatory compliance can be met. Interoperability is enabled between blockchains within a subnet as well as between subnets. Like Cosmos and Polkadot, Avalanche is also able to connect to other systems through bridges, through custom virtual machines made to interact with another ecosystem such as Ethereum and Bitcoin.
For a more in-depth look at Avalanche and provide more reference to points made in this article, please see here and here
(There's a youtube video with a quick video overview of Avalanche on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
Comparison between Cosmos, Polkadot and AvalancheA frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions. I want to stress that it’s not a case of one platform being the killer of all other platforms, far from it. There won’t be one platform to rule them all, and too often the tribalism has plagued this space. Blockchains are going to completely revolutionise most industries and have a profound effect on the world we know today. It’s still very early in this space with most adoption limited to speculation and trading mainly due to the limitations of Blockchain and current iteration of Ethereum, which all three of these platforms hope to address. For those who just want a quick summary see the image at the bottom of the article. With that said let’s have a look
CosmosEach Zone and Hub in Cosmos is capable of up to around 1000 transactions per second with bandwidth being the bottleneck in consensus. Cosmos aims to have thousands of Zones and Hubs all connected through IBC. There is no limit on the number of Zones / Hubs that can be created
PolkadotParachains in Polkadot are also capable of up to around 1500 transactions per second. A portion of the parachain slots on the Relay Chain will be designated as part of the parathread pool, the performance of a parachain is split between many parathreads offering lower performance and compete amongst themselves in a per-block auction to have their transactions included in the next relay chain block. The number of parachains is limited by the number of validators on the relay chain, they hope to be able to achieve 100 parachains.
AvalancheAvalanche is capable of around 4500 transactions per second per subnet, this is based on modest hardware requirements to ensure maximum decentralisation of just 2 CPU cores and 4 GB of Memory and with a validator size of over 2,000 nodes. Performance is CPU-bound and if higher performance is required then more specialised subnets can be created with higher minimum requirements to be able to achieve 10,000 tps+ in a subnet. Avalanche aims to have thousands of subnets (each with multiple virtual machines / blockchains) all interoperable with each other. There is no limit on the number of Subnets that can be created.
ResultsAll three platforms offer vastly superior performance to the likes of Bitcoin and Ethereum 1.0. Avalanche with its higher transactions per second, no limit on the number of subnets / blockchains that can be created and the consensus can scale to potentially millions of validators all participating in consensus scores ✅✅✅. Polkadot claims to offer more tps than cosmos, but is limited to the number of parachains (around 100) whereas with Cosmos there is no limit on the number of hubs / zones that can be created. Cosmos is limited to a fairly small validator size of around 200 before performance degrades whereas Polkadot hopes to be able to reach 1000 validators in the relay chain (albeit only a small number of validators are assigned to each parachain). Thus Cosmos and Polkadot scores ✅✅
CosmosTendermint consensus is limited to around 200 validators before performance starts to degrade. Whilst there is the Cosmos Hub it is one of many hubs in the network and there is no central hub or limit on the number of zones / hubs that can be created.
PolkadotPolkadot has 1000 validators in the relay chain and these are split up into a small number that validate each parachain (minimum of 14). The relay chain is a central point of failure as all parachains connect to it and the number of parachains is limited depending on the number of validators (they hope to achieve 100 parachains). Due to the limited number of parachain slots available, significant sums of DOT will need to be purchased to win an auction to lease the slot for up to 24 months at a time. Thus likely to lead to only those with enough funds to secure a parachain slot. Parathreads are however an alternative for those that require less and more varied performance for those that can’t secure a parachain slot.
AvalancheAvalanche consensus scan scale to tens of thousands of validators, even potentially millions of validators all participating in consensus through repeated sub-sampling. The more validators, the faster the network becomes as the load is split between them. There are modest hardware requirements so anyone can run a node and there is no limit on the number of subnets / virtual machines that can be created.
ResultsAvalanche offers unparalleled decentralisation using its revolutionary consensus protocols that can scale to millions of validators all participating in consensus at the same time. There is no limit to the number of subnets and virtual machines that can be created, and they can be created by anyone for a small fee, it scores ✅✅✅. Cosmos is limited to 200 validators but no limit on the number of zones / hubs that can be created, which anyone can create and scores ✅✅. Polkadot hopes to accommodate 1000 validators in the relay chain (albeit these are split amongst each of the parachains). The number of parachains is limited and maybe cost prohibitive for many and the relay chain is a ultimately a single point of failure. Whilst definitely not saying it’s centralised and it is more decentralised than many others, just in comparison between the three, it scores ✅
CosmosTendermint consensus used in Cosmos reaches finality within 6 seconds. Cosmos consists of many Zones and Hubs that connect to each other. Communication between 2 zones could pass through many hubs along the way, thus also can contribute to latency times depending on the path taken as explained in part two of the articles on Cosmos. It doesn’t need to wait for an extended period of time with risk of rollbacks.
PolkadotPolkadot provides a Hybrid consensus protocol consisting of Block producing protocol, BABE, and then a finality gadget called GRANDPA that works to agree on a chain, out of many possible forks, by following some simpler fork choice rule. Rather than voting on every block, instead it reaches agreements on chains. As soon as more than 2/3 of validators attest to a chain containing a certain block, all blocks leading up to that one are finalized at once.
If an invalid block is detected after it has been finalised then the relay chain would need to be reverted along with every parachain. This is particularly important when connecting to external blockchains as those don’t share the state of the relay chain and thus can’t be rolled back. The longer the time period, the more secure the network is, as there is more time for additional checks to be performed and reported but at the expense of finality. Finality is reached within 60 seconds between parachains but for external ecosystems like Ethereum their state obviously can’t be rolled back like a parachain and so finality will need to be much longer (60 minutes was suggested in the whitepaper) and discussed in more detail in part three
AvalancheAvalanche consensus achieves finality within 3 seconds, with most happening sub 1 second, immutable and completely irreversible. Any subnet can connect directly to another without having to go through multiple hops and any VM can talk to another VM within the same subnet as well as external subnets. It doesn’t need to wait for an extended period of time with risk of rollbacks.
ResultsWith regards to performance far too much emphasis is just put on tps as a metric, the other equally important metric, if not more important with regards to finance is latency. Throughput measures the amount of data at any given time that it can handle whereas latency is the amount of time it takes to perform an action. It’s pointless saying you can process more transactions per second than VISA when it takes 60 seconds for a transaction to complete. Low latency also greatly increases general usability and customer satisfaction, nowadays everyone expects card payments, online payments to happen instantly. Avalanche achieves the best results scoring ✅✅✅, Cosmos with comes in second with 6 second finality ✅✅ and Polkadot with 60 second finality (which may be 60 minutes for external blockchains) scores ✅
CosmosEvery Zone and Hub in Cosmos has their own validator set and different trust assumptions. Cosmos are researching a shared security model where a Hub can validate the state of connected zones for a fee but not released yet. Once available this will make shared security optional rather than mandatory.
PolkadotShared Security is mandatory with Polkadot which uses a Shared State infrastructure between the Relay Chain and all of the connected parachains. If the Relay Chain must revert for any reason, then all of the parachains would also revert. Every parachain makes the same trust assumptions, and as such the relay chain validates state transition and enables seamless interoperability between them. In return for this benefit, they have to purchase DOT and win an auction for one of the available parachain slots.
However, parachains can’t just rely on the relay chain for their security, they will also need to implement censorship resistance measures and utilise proof of work / proof of stake for each parachain as well as discussed in part three, thus parachains can’t just rely on the security of the relay chain, they need to ensure sybil resistance mechanisms using POW and POS are implemented on the parachain as well.
AvalancheA subnet in Avalanche consists of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance. So unlike in Cosmos where each zone / hub has their own validators, A subnet can validate a single or many virtual machines / blockchains with a single validator set. Shared security is optional
ResultsShared security is mandatory in polkadot and a key design decision in its infrastructure. The relay chain validates the state transition of all connected parachains and thus scores ✅✅✅. Subnets in Avalanche can validate state of either a single or many virtual machines. Each subnet can have their own token and shares a validator set, where complex rulesets can be configured to meet regulatory compliance. It scores ✅ ✅. Every Zone and Hub in cosmos has their own validator set / token but research is underway to have the hub validate the state transition of connected zones, but as this is still early in the research phase scores ✅ for now.
CosmosThe Cosmos project started in 2016 with an ICO held in April 2017. There are currently around 50 projects building on the Cosmos SDK with a full list can be seen here and filtering for Cosmos SDK . Not all of the projects will necessarily connect using native cosmos sdk and IBC and some have forked parts of the Cosmos SDK and utilise the tendermint consensus such as Binance Chain but have said they will connect in the future.
PolkadotThe Polkadot project started in 2016 with an ICO held in October 2017. There are currently around 70 projects building on Substrate and a full list can be seen here and filtering for Substrate Based. Like with Cosmos not all projects built using substrate will necessarily connect to Polkadot and parachains or parathreads aren’t currently implemented in either the Live or Test network (Kusama) as of the time of this writing.
AvalancheAvalanche in comparison started much later with Ava Labs being founded in 2018. Avalanche held it’s ICO in July 2020. Due to lot shorter time it has been in development, the number of projects confirmed are smaller with around 14 projects currently building on Avalanche. Due to the customisability of the platform though, many virtual machines can be used within a subnet making the process incredibly easy to port projects over. As an example, it will launch with the Ethereum Virtual Machine which enables byte for byte compatibility and all the tooling like Metamask, Truffle etc. will work, so projects can easily move over to benefit from the performance, decentralisation and low gas fees offered. In the future Cosmos and Substrate virtual machines could be implemented on Avalanche.
ResultsWhilst it’s still early for all 3 projects (and the entire blockchain space as a whole), there is currently more projects confirmed to be building on Cosmos and Polkadot, mostly due to their longer time in development. Whilst Cosmos has fewer projects, zones are implemented compared to Polkadot which doesn’t currently have parachains. IBC to connect zones and hubs together is due to launch Q2 2021, thus both score ✅✅✅. Avalanche has been in development for a lot shorter time period, but is launching with an impressive feature set right from the start with ability to create subnets, VMs, assets, NFTs, permissioned and permissionless blockchains, cross chain atomic swaps within a subnet, smart contracts, bridge to Ethereum etc. Applications can easily port over from other platforms and use all the existing tooling such as Metamask / Truffle etc but benefit from the performance, decentralisation and low gas fees offered. Currently though just based on the number of projects in comparison it scores ✅.
CosmosCosmos enables permissioned and permissionless zones which can connect to each other with the ability to have full control over who validates the blockchain. For permissionless zones each zone / hub can have their own token and they are in control who validates.
PolkadotWith polkadot the state transition is performed by a small randomly selected assigned group of validators from the relay chain plus with the possibility that state is rolled back if an invalid transaction of any of the other parachains is found. This may pose a problem for enterprises that need complete control over who performs validation for regulatory reasons. In addition due to the limited number of parachain slots available Enterprises would have to acquire and lock up large amounts of a highly volatile asset (DOT) and have the possibility that they are outbid in future auctions and find they no longer can have their parachain validated and parathreads don’t provide the guaranteed performance requirements for the application to function.
AvalancheAvalanche enables permissioned and permissionless subnets and complex rulesets can be configured to meet regulatory compliance. For example a subnet can be created where its mandatory that all validators are from a certain legal jurisdiction, or they hold a specific license and regulated by the SEC etc. Subnets are also able to scale to tens of thousands of validators, and even potentially millions of nodes, all participating in consensus so every enterprise can run their own node rather than only a small amount. Enterprises don’t have to hold large amounts of a highly volatile asset, but instead pay a fee in AVAX for the creation of the subnets and blockchains which is burnt.
ResultsAvalanche provides the customisability to run private permissioned blockchains as well as permissionless where the enterprise is in control over who validates the blockchain, with the ability to use complex rulesets to meet regulatory compliance, thus scores ✅✅✅. Cosmos is also able to run permissioned and permissionless zones / hubs so enterprises have full control over who validates a blockchain and scores ✅✅. Polkadot requires locking up large amounts of a highly volatile asset with the possibility of being outbid by competitors and being unable to run the application if the guaranteed performance is required and having to migrate away. The relay chain validates the state transition and can roll back the parachain should an invalid block be detected on another parachain, thus scores ✅.
CosmosCosmos will connect Hubs and Zones together through its IBC protocol (due to release in Q1 2020). Connecting to blockchains outside of the Cosmos ecosystem would either require the connected blockchain to fork their code to implement IBC or more likely a custom “Peg Zone” will be created specific to work with a particular blockchain it’s trying to bridge to such as Ethereum etc. Each Zone and Hub has different trust levels and connectivity between 2 zones can have different trust depending on which path it takes (this is discussed more in this article). Finality time is low at 6 seconds, but depending on the number of hops, this can increase significantly.
PolkadotPolkadot’s shared state means each parachain that connects shares the same trust assumptions, of the relay chain validators and that if one blockchain needs to be reverted, all of them will need to be reverted. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Finality time between parachains is around 60 seconds, but longer will be needed (initial figures of 60 minutes in the whitepaper) for connecting to external blockchains. Thus limiting the appeal of connecting two external ecosystems together through Polkadot. Polkadot is also limited in the number of Parachain slots available, thus limiting the amount of blockchains that can be bridged. Parathreads could be used for lower performance bridges, but the speed of future blockchains is only going to increase.
AvalancheA subnet can validate multiple virtual machines / blockchains and all blockchains within a subnet share the same trust assumptions / validator set, enabling cross chain interoperability. Interoperability is also possible between any other subnet, with the hope Avalanche will consist of thousands of subnets. Each subnet may have a different trust level, but as the primary network consists of all validators then this can be used as a source of trust if required. As Avalanche supports many virtual machines, bridges to other ecosystems are created by running the connected virtual machine. There will be an Ethereum bridge using the EVM shortly after mainnet. Finality time is much faster at sub 3 seconds (with most happening under 1 second) with no chance of rolling back so more appealing when connecting to external blockchains.
ResultsAll 3 systems are able to perform interoperability within their ecosystem and transfer assets as well as data, as well as use bridges to connect to external blockchains. Cosmos has different trust levels between its zones and hubs and can create issues depending on which path it takes and additional latency added. Polkadot provides the same trust assumptions for all connected parachains but has long finality and limited number of parachain slots available. Avalanche provides the same trust assumptions for all blockchains within a subnet, and different trust levels between subnets. However due to the primary network consisting of all validators it can be used for trust. Avalanche also has a much faster finality time with no limitation on the number of blockchains / subnets / bridges that can be created. Overall all three blockchains excel with interoperability within their ecosystem and each score ✅✅.
CosmosThe ATOM token is the native token for the Cosmos Hub. It is commonly mistaken by people that think it’s the token used throughout the cosmos ecosystem, whereas it’s just used for one of many hubs in Cosmos, each with their own token. Currently ATOM has little utility as IBC isn’t released and has no connections to other zones / hubs. Once IBC is released zones may prefer to connect to a different hub instead and so ATOM is not used. ATOM isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for ATOM as of the time of this writing is $1 Billion with 203 million circulating supply. Rewards can be earnt through staking to offset the dilution caused by inflation. Delegators can also get slashed and lose a portion of their ATOM should the validator misbehave.
PolkadotPolkadot’s native token is DOT and it’s used to secure the Relay Chain. Each parachain needs to acquire sufficient DOT to win an auction on an available parachain lease period of up to 24 months at a time. Parathreads have a fixed fee for registration that would realistically be much lower than the cost of acquiring a parachain slot and compete with other parathreads in a per-block auction to have their transactions included in the next relay chain block. DOT isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for DOT as of the time of this writing is $4.4 Billion with 852 million circulating supply. Delegators can also get slashed and lose their DOT (potentially 100% of their DOT for serious attacks) should the validator misbehave.
AvalancheAVAX is the native token for the primary network in Avalanche. Every validator of any subnet also has to validate the primary network and stake a minimum of 2000 AVAX. There is no limit to the number of validators like other consensus methods then this can cater for tens of thousands even potentially millions of validators. As every validator validates the primary network, this can be a source of trust for interoperability between subnets as well as connecting to other ecosystems, thus increasing amount of transaction fees of AVAX. There is no slashing in Avalanche, so there is no risk to lose your AVAX when selecting a validator, instead rewards earnt for staking can be slashed should the validator misbehave. Because Avalanche doesn’t have direct slashing, it is technically possible for someone to both stake AND deliver tokens for something like a flash loan, under the invariant that all tokens that are staked are returned, thus being able to make profit with staked tokens outside of staking itself.
There will also be a separate subnet for Athereum which is a ‘spoon,’ or friendly fork, of Ethereum, which benefits from the Avalanche consensus protocol and applications in the Ethereum ecosystem. It’s native token ATH will be airdropped to ETH holders as well as potentially AVAX holders as well. This can be done for other blockchains as well.
Transaction fees on the primary network for all 3 of the blockchains as well as subscription fees for creating a subnet and blockchain are paid in AVAX and are burnt, creating deflationary pressure. AVAX is a fixed capped supply of 720 million tokens, creating scarcity rather than an unlimited supply which continuously increase of tokens at a compounded rate each year like others. Initially there will be 360 tokens minted at Mainnet with vesting periods between 1 and 10 years, with tokens gradually unlocking each quarter. The Circulating supply is 24.5 million AVAX with tokens gradually released each quater. The current market cap of AVAX is around $100 million.
ResultsAvalanche’s AVAX with its fixed capped supply, deflationary pressure, very strong utility, potential to receive air drops and low market cap, means it scores ✅✅✅. Polkadot’s DOT also has very strong utility with the need for auctions to acquire parachain slots, but has no deflationary mechanisms, no fixed capped supply and already valued at $3.8 billion, therefore scores ✅✅. Cosmos’s ATOM token is only for the Cosmos Hub, of which there will be many hubs in the ecosystem and has very little utility currently. (this may improve once IBC is released and if Cosmos hub actually becomes the hub that people want to connect to and not something like Binance instead. There is no fixed capped supply and currently valued at $1.1 Billion, so scores ✅.
All three are excellent projects and have similarities as well as many differences. Just to reiterate this article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions, you may have different criteria which is important to you, and score them differently. There won’t be one platform to rule them all however, with some uses cases better suited to one platform over another, and it’s not a zero-sum game. Blockchain is going to completely revolutionize industries and the Internet itself. The more projects researching and delivering breakthrough technology the better, each learning from each other and pushing each other to reach that goal earlier. The current market is a tiny speck of what’s in store in terms of value and adoption and it’s going to be exciting to watch it unfold.
For more information see the articles below (each with additional sources at the bottom of their articles)
Avalanche, a Revolutionary Consensus Engine and Platform. A Game Changer for Blockchain
Avalanche Consensus, The Biggest Breakthrough since Nakamoto
Cosmos — An Early In-Depth Analysis — Part One
Cosmos — An Early In-Depth Analysis — Part Two
Cosmos Hub ATOM Token and the commonly misunderstood staking tokens — Part Three
Polkadot — An Early In-Depth Analysis — Part One — Overview and Benefits
Polkadot — An Early In-Depth Analysis — Part Two — How Consensus Works
Polkadot — An Early In-Depth Analysis — Part Three — Limitations and Issues
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
Stakenet is a Lightning Network-ready open-source platform for decentralized applications with its native cryptocurrency – XSN. It is powered by a Proof of Stake blockchain with trustless cold staking and Masternodes. Its use case is to provide a highly secure cross-chain infrastructure for these decentralized applications, where individuals can easily operate with any blockchain simply by using Stakenet and its native currency XSN.Ok... but what does it actually do and solve?
What is Grayscale?Grayscale is the company that created the ETHE product. Their website is https://grayscale.co/
What is ETHE?ETHE is essentially a stock that intends to loosely track the price of ETH. It does so by having each ETHE be backed by a specific amount of ETH that is held on chain. Initially, the newly minted ETHE can only be purchased by institutions and accredited investors directly from Grayscale. Once a year has passed (6 months for GBTC) it can then be listed on the OTCQX Best Market exchange for secondary trading. Once listed on OTCQX, anyone investor can purchase at this point. Additional information on ETHE can be found here.
So ETHE is an ETF?No. For technical reasons beyond my personal understandings it is not labeled an ETF. I know it all flows back to the “Securities Act Rule 144”, but due to my limited knowledge on SEC regulations I don’t want to misspeak past that. If anyone is more knowledgeable on the subject I am happy to input their answer here.
How long has ETHE existed?ETHE was formed 12/14/2017. GBTC was formed 9/25/2013.
How is ETHE created?The trust will issue shares to “Authorized Participants” in groups of 100 shares (called baskets). Authorized Participants are the only persons that may place orders to create these baskets and they do it on behalf of the investor.
How does Grayscale acquire the ETH to collateralize the ETHE product?An Investor may acquire ETHE by paying in cash or exchanging ETH already owned.
Where does Grayscale store their ETH? Does it have a specific wallet address we can follow?ETH is stored with Coinbase Custody Trust Company, LLC. I am unaware of any specific address or set of addresses that can be used to verify the ETH is actually there.
Can ETHE be redeemed for ETH?No, currently there is no way to give your shares of ETHE back to Grayscale to receive ETH back. The only method of getting back into ETH would be to sell your ETHE to someone else and then use those proceeds to buy ETH yourself.
Why are they not redeeming shares?I think the report summarizes it best:
Redemptions of Shares are currently not permitted and the Trust is unable to redeem Shares. Subject to receipt of regulatory approval from the SEC and approval by the Sponsor in its sole discretion, the Trust may in the future operate a redemption program. Because the Trust does not believe that the SEC would, at this time, entertain an application for the waiver of rules needed in order to operate an ongoing redemption program, the Trust currently has no intention of seeking regulatory approval from the SEC to operate an ongoing redemption program.Source: Redemption Procedures on page 41 of the “Grayscale Ethereum Trust Annual Report (2019)” – Located Here
What is the fee structure?ETHE has an annual fee of 2.5%. GBTC has an annual fee of 2.0%. Fees are paid by selling the underlying ETH / BTC collateralizing the asset.
What is the ratio of ETH to ETHE?At the time of posting (6/19/2020) each ETHE share is backed by .09391605 ETH. Each share of GBTC is backed by .00096038 BTC.
Why is the ratio not 1:1? Why is it always decreasing?While I cannot say for certain why the initial distribution was not a 1:1 backing, it is more than likely to keep the price down and allow more investors a chance to purchase ETHE / GBTC.
I keep hearing about how this is locked supply… explain?As noted above, there is currently no redemption program for converting your ETHE back into ETH. This means that once an ETHE is issued, it will remain in circulation until a redemption program is formed --- something that doesn’t seem to be too urgent for the SEC or Grayscale at the moment. Tiny amounts will naturally be removed due to fees, but the bulk of the asset is in there for good.
The Trust’s ETH will be transferred out of the ETH Account only in the following circumstances: (i) transferred to pay the Sponsor’s Fee or any Additional Trust Expenses, (ii) distributed in connection with the redemption of Baskets (subject to the Trust’s obtaining regulatory approval from the SEC to operate an ongoing redemption program and the consent of the Sponsor), (iii) sold on an as-needed basis to pay Additional Trust Expenses or (iv) sold on behalf of the Trust in the event the Trust terminates and liquidates its assets or as otherwise required by law or regulation.Source: Description of Trust on page 31 of the “Grayscale Ethereum Trust Annual Report (2019)” – Located Here
Grayscale now owns a huge chunk of both ETH and BTC’s supply… should we be worried about manipulation, a sell off to crash the market crash, a staking cartel?First, it’s important to remember Grayscale is a lot more akin to an exchange then say an investment firm. Grayscale is working on behalf of its investors to create this product for investor control. Grayscale doesn’t ‘control’ the ETH it holds any more then Coinbase ‘controls’ the ETH in its hot wallet. (Note: There are likely some varying levels of control, but specific to this topic Grayscale cannot simply sell [legally, at least] the ETH by their own decision in the same manner Coinbase wouldn't be able to either.)
Yes, but what about [insert criminal act here]…Alright, yes. Technically nothing is stopping Grayscale from selling all the ETH / BTC and running off to the Bahamas (Hawaii?). BUT there is no real reason for them to do so. Barry is an extremely public figure and it won’t be easy for him to get away with that. Grayscale’s Bitcoin Trust creates SEC reports weekly / bi-weekly and I’m sure given the sentiment towards crypto is being watched carefully. Plus, Grayscale is making tons of consistent revenue and thus has little to no incentive to give that up for a quick buck.
That’s a lot of ‘happy little feels’ Bob, is there even an independent audit or is this Tether 2.0?Actually yes, an independent auditor report can be found in their annual reports. It is clearly aimed more towards the financial side and I doubt the auditors are crypto savants, but it is at least one extra set of eyes. Auditors are Friedman LLP – Auditor since 2015.
The company’s auditors Friedman LLP were also coincidentally TetheBitfinex’s auditors until They controversially parted ways in 2018 when the Tether controversy was at its height. I am not suggesting for one moment that there is anything shady about DCG - I just find it interesting it’s the same auditor.
“Grayscale sounds kind of lame” / “Not your keys not your crypto!” / “Why is anyone buying this, it sounds like a scam?”Welp, for starters this honestly is not really a product aimed at the people likely to be reading this post. To each their own, but do remember just because something provides no value to you doesn’t mean it can’t provide value to someone else. That said some of the advertised benefits are as follows:
Why is there a premium? Why is ETHE’s premium so insanely high compared to GBTC’s premium?There are a handful of theories of why a premium exists at all, some even mentioned in the annual report. The short list is as follows:
Are there any other differences between ETHE and GBTC?I touched on a few of the smaller differences, but one of the more interesting changes is GBTC is now a “SEC reporting company” as of January 2020. Which again goes beyond my scope of knowledge so I won’t comment on it too much… but the net result is GBTC is now putting out weekly / bi-weekly 8-K’s and annual 10-K’s. This means you can track GBTC that much easier at the moment as well as there is an extra layer of validity to the product IMO.
I’m looking for some statistics on ETHE… such as who is buying, how much is bought, etc?There is a great Q1 2020 report I recommend you give a read that has a lot of cool graphs and data on the product. It’s a little GBTC centric, but there is some ETHE data as well. It can be found here hidden within the 8-K filings.Q1 2020 is the 4/16/2020 8-K filing.
Is Grayscale only just for BTC and ETH?No, there are other products as well. In terms of a secondary market product, ETCG is the Ethereum Classic version of ETHE. Fun Fact – ETCG was actually put out to the secondary market first. It also has a 3% fee tied to it where 1% of it goes to some type of ETC development fund.
Are there alternatives to Grayscale?I know they exist, but I don’t follow them. I’ll leave this as a “to be edited” section and will add as others comment on what they know.
Coinshares (Formerly XBT provider) are the only similar product I know of. BTC, ETH, XRP and LTC as Exchange Traded Notes (ETN).
It looks like they are fully backed with the underlying crypto (no premium).
Denominated in SEK and EUR. Certainly available in some UK pensions (SIPP).
As asked by pegcity - Okay so I was under the impression you can just give them your own ETH and get ETHE, but do you get 11 ETHE per ETH or do you get the market value of ETH in USD worth of ETHE?I have always understood that the ETHE issued directly through Grayscale is issued without the premium. As in, if I were to trade 1 ETH for ETHE I would get 11, not say only 2 or 3 because the secondary market premium is so high. And if I were paying cash only I would be paying the price to buy 1 ETH to get my 11 ETHE. Per page 39 of their annual statement, it reads as follows:
The Trust will issue Shares to Authorized Participants from time to time, but only in one or more Baskets (with a Basket being a block of 100 Shares). The Trust will not issue fractions of a Basket. The creation (and, should the Trust commence a redemption program, redemption) of Baskets will be made only in exchange for the delivery to the Trust, or the distribution by the Trust, of the number of whole and fractional ETH represented by each Basket being created (or, should the Trust commence a redemption program, redeemed), which is determined by dividing (x) the number of ETH owned by the Trust at 4:00 p.m., New York time, on the trade date of a creation or redemption order, after deducting the number of ETH representing the U.S. dollar value of accrued but unpaid fees and expenses of the Trust (converted using the ETH Index Price at such time, and carried to the eighth decimal place), by (y) the number of Shares outstanding at such time (with the quotient so obtained calculated to one one-hundred-millionth of one ETH (i.e., carried to the eighth decimal place)), and multiplying such quotient by 100 (the “Basket ETH Amount”). All questions as to the calculation of the Basket ETH Amount will be conclusively determined by the Sponsor and will be final and binding on all persons interested in the Trust. The Basket ETH Amount multiplied by the number of Baskets being created or redeemed is the “Total Basket ETH Amount.” The number of ETH represented by a Share will gradually decrease over time as the Trust’s ETH are used to pay the Trust’s expenses. Each Share represented approximately 0.0950 ETH and 0.0974 ETH as of December 31, 2019 and 2018, respectively.
Author: Gamals Ahmed, CoinEx Business Ambassadorsubmitted by CoinEx_Institution to kybernetwork [link] [comments]
ABSTRACTIn this research report, we present a study on Kyber Network. Kyber Network is a decentralized, on-chain liquidity protocol designed to make trading tokens simple, efficient, robust and secure.
Kyber design allows any party to contribute to an aggregated pool of liquidity within each blockchain while providing a single endpoint for takers to execute trades using the best rates available. We envision a connected liquidity network that facilitates seamless, decentralized cross-chain token swaps across Kyber based networks on different chains.
Kyber is a fully on-chain liquidity protocol that enables decentralized exchange of cryptocurrencies in any application. Liquidity providers (Reserves) are integrated into one single endpoint for takers and users. When a user requests a trade, the protocol will scan the entire network to find the reserve with the best price and take liquidity from that particular reserve.
1.INTRODUCTIONDeFi applications all need access to good liquidity sources, which is a critical component to provide good services. Currently, decentralized liquidity is comprised of various sources including DEXes (Uniswap, OasisDEX, Bancor), decentralized funds and other financial apps. The more scattered the sources, the harder it becomes for anyone to either find the best rate for their trade or to even find enough liquidity for their need.
Kyber is a blockchain-based liquidity protocol that aggregates liquidity from a wide range of reserves, powering instant and secure token exchange in any decentralized application.
The protocol allows for a wide range of implementation possibilities for liquidity providers, allowing a wide range of entities to contribute liquidity, including end users, decentralized exchanges and other decentralized protocols. On the taker side, end users, cryptocurrency wallets, and smart contracts are able to perform instant and trustless token trades at the best rates available amongst the sources.
The Kyber Network is project based on the Ethereum protocol that seeks to completely decentralize the exchange of crypto currencies and make exchange trustless by keeping everything on the blockchain.
Through the Kyber Network, users should be able to instantly convert or exchange any crypto currency.
1.1 OVERVIEW ABOUT KYBER NETWORK PROTOCOLThe Kyber Network is a decentralized way to exchange ETH and different ERC20 tokens instantly — no waiting and no registration needed.
Using this protocol, developers can build innovative payment flows and applications, including instant token swap services, ERC20 payments, and financial DApps — helping to build a world where any token is usable anywhere.
Kyber’s fully on-chain design allows for full transparency and verifiability in the matching engine, as well as seamless composability with DApps, not all of which are possible with off-chain or hybrid approaches. The integration of a large variety of liquidity providers also makes Kyber uniquely capable of supporting sophisticated schemes and catering to the needs of DeFi DApps and financial institutions. Hence, many developers leverage Kyber’s liquidity pool to build innovative financial applications, and not surprisingly, Kyber is the most used DeFi protocol in the world.
The Kyber Network is quite an established project that is trying to change the way we think of decentralised crypto currency exchange.
The Kyber Network has seen very rapid development. After being announced in May 2017 the testnet for the Kyber Network went live in August 2017. An ICO followed in September 2017, with the company raising 200,000 ETH valued at $60 million in just one day.
The live main net was released in February 2018 to whitelisted participants, and on March 19, 2018, the Kyber Network opened the main net as a public beta. Since then the network has seen increasing growth, with network volumes growing more than 500% in the first half of 2019.
Although there was a modest decrease in August 2019 that can be attributed to the price of ETH dropping by 50%, impacting the overall total volumes being traded and processed globally.
They are developing a decentralised exchange protocol that will allow developers to build payment flows and financial apps. This is indeed quite a competitive market as a number of other such protocols have been launched.
In Brief - Kyber Network is a tool that allows anyone to swap tokens instantly without having to use exchanges. - It allows vendors to accept different types of cryptocurrency while still being paid in their preferred crypto of choice. - It’s built primarily for Ethereum, but any smart-contract based blockchain can incorporate it.
At its core, Kyber is a decentralized way to exchange ETH and different ERC20 tokens instantly–no waiting and no registration needed. To do this Kyber uses a diverse set of liquidity pools, or pools of different crypto assets called “reserves” that any project can tap into or integrate with.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
All this swapping happens directly on the Ethereum blockchain, meaning every transaction is completely transparent.
1.1.1 WHY BUILD THE KYBER NETWORK?While crypto currencies were built to be decentralized, many of the exchanges for trading crypto currencies have become centralized affairs. This has led to security vulnerabilities, with many exchanges becoming the victims of hacking and theft.
It has also led to increased fees and costs, and the centralized exchanges often come with slow transfer times as well. In some cases, wallets have been locked and users are unable to withdraw their coins.
Decentralized exchanges have popped up recently to address the flaws in the centralized exchanges, but they have their own flaws, most notably a lack of liquidity, and often times high costs to modify trades in their on-chain order books.
Some of the Integrations with Kyber Protocol
The Kyber Network was formed to provide users with a decentralized exchange that keeps everything right on the blockchain, and uses a reserve system rather than an order book to provide high liquidity at all times. This will allow for the exchange and transfer of any cryptocurrency, even cross exchanges, and costs will be kept at a minimum as well.
The Kyber Network has three guiding design philosophies since the start:
1.1.2 WHO INVENTED KYBER?Kyber’s founders are Loi Luu, Victor Tran, Yaron Velner — CEO, CTO, and advisor to the Kyber Network.
1.1.3 WHAT DISTINGUISHES KYBER?Kyber’s mission has always been to integrate with other protocols so they’ve focused on being developer-friendly by providing architecture to allow anyone to incorporate the technology onto any smart-contract powered blockchain. As a result, a variety of different dapps, vendors, and wallets use Kyber’s infrastructure including Set Protocol, bZx, InstaDApp, and Coinbase wallet.
Besides, dapps, vendors, and wallets, Kyber also integrates with other exchanges such as Uniswap — sharing liquidity pools between the two protocols.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
Limit orders on Kyber allow users to set a specific price in which they would like to exchange a token instead of accepting whatever price currently exists at the time of trading. However, unlike with other exchanges, users never lose custody of their crypto assets during limit orders on Kyber.
The Kyber protocol works by using pools of crypto funds called “reserves”, which currently support over 70 different ERC20 tokens. Reserves are essentially smart contracts with a pool of funds. Different parties with different prices and levels of funding control all reserves. Instead of using order books to match buyers and sellers to return the best price, the Kyber protocol looks at all the reserves and returns the best price among the different reserves. Reserves make money on the “spread” or differences between the buying and selling prices. The Kyber wants any token holder to easily convert one token to another with a minimum of fuss.
1.2 KYBER PROTOCOLThe protocol smart contracts offer a single interface for the best available token exchange rates to be taken from an aggregated liquidity pool across diverse sources. ● Aggregated liquidity pool. The protocol aggregates various liquidity sources into one liquidity pool, making it easy for takers to find the best rates offered with one function call. ● Diverse sources of liquidity. The protocol allows different types of liquidity sources to be plugged into. Liquidity providers may employ different strategies and different implementations to contribute liquidity to the protocol. ● Permissionless. The protocol is designed to be permissionless where any developer can set up various types of reserves, and any end user can contribute liquidity. Implementations need to take into consideration various security vectors, such as reserve spamming, but can be mitigated through a staking mechanism. We can expect implementations to be permissioned initially until the maintainers are confident about these considerations.
The core feature that the Kyber protocol facilitates is the token swap between taker and liquidity sources. The protocol aims to provide the following properties for token trades: ● Instant Settlement. Takers do not have to wait for their orders to be fulfilled, since trade matching and settlement occurs in a single blockchain transaction. This enables trades to be part of a series of actions happening in a single smart contract function. ● Atomicity. When takers make a trade request, their trade either gets fully executed, or is reverted. This “all or nothing” aspect means that takers are not exposed to the risk of partial trade execution. ● Public rate verification. Anyone can verify the rates that are being offered by reserves and have their trades instantly settled just by querying from the smart contracts. ● Ease of integration. Trustless and atomic token trades can be directly and easily integrated into other smart contracts, thereby enabling multiple trades to be performed in a smart contract function.
How each actor works is specified in Section Network Actors. 1. Takers refer to anyone who can directly call the smart contract functions to trade tokens, such as end-users, DApps, and wallets. 2. Reserves refer to anyone who wishes to provide liquidity. They have to implement the smart contract functions defined in the reserve interface in order to be registered and have their token pairs listed. 3. Registered reserves refer to those that will be cycled through for matching taker requests. 4. Maintainers refer to anyone who has permission to access the functions for the adding/removing of reserves and token pairs, such as a DAO or the team behind the protocol implementation. 5. In all, they comprise of the network, which refers to all the actors involved in any given implementation of the protocol.
The protocol implementation needs to have the following: 1. Functions for takers to check rates and execute the trades 2. Functions for the maintainers to registeremove reserves and token pairs 3. Reserve interface that defines the functions reserves needs to implement
1.3 KYBER CORE SMART CONTRACTSKyber Core smart contracts is an implementation of the protocol that has major protocol functions to allow actors to join and interact with the network. For example, the Kyber Core smart contracts provide functions for the listing and delisting of reserves and trading pairs by having clear interfaces for the reserves to comply to be able to register to the network and adding support for new trading pairs. In addition, the Kyber Core smart contracts also provide a function for takers to query the best rate among all the registered reserves, and perform the trades with the corresponding rate and reserve. A trading pair consists of a quote token and any other token that the reserve wishes to support. The quote token is the token that is either traded from or to for all trades. For example, the Ethereum implementation of the Kyber protocol uses Ether as the quote token.
In order to search for the best rate, all reserves supporting the requested token pair will be iterated through. Hence, the Kyber Core smart contracts need to have this search algorithm implemented.
The key functions implemented in the Kyber Core Smart Contracts are listed in Figure 2 below. We will visit and explain the implementation details and security considerations of each function in the Specification Section.
1.4 HOW KYBER’S ON-CHAIN PROTOCOL WORKS?Kyber is the liquidity infrastructure for decentralized finance. Kyber aggregates liquidity from diverse sources into a pool, which provides the best rates for takers such as DApps, Wallets, DEXs, and End users.
1.4.1 PROVIDING LIQUIDITY AS A RESERVEAnyone can operate a Kyber Reserve to market make for profit and make their tokens available for DApps in the ecosystem. Through an open reserve architecture, individuals, token teams and professional market makers can contribute token assets to Kyber’s liquidity pool and earn from the spread in every trade. These tokens become available at the best rates across DApps that tap into the network, making them instantly more liquid and useful.
MAIN RESERVE TYPES Kyber currently has over 45 reserves in its network providing liquidity. There are 3 main types of reserves that allow different liquidity contribution options to suit the unique needs of different providers. 1. Automated Price Reserves (APR) — Allows token teams and users with large token holdings to have an automated yet customized pricing system with low maintenance costs. Synthetix and Melon are examples of teams that run APRs. 2. Fed Price Reserves (FPR) — Operated by professional market makers that require custom and advanced pricing strategies tailored to their specific needs. Kyber alongside reserves such as OneBit, runs FPRs. 3. Bridge Reserves (BR) — These are specialized reserves meant to bring liquidity from other on-chain liquidity providers like Uniswap, Oasis, DutchX, and Bancor into the network.
1.5 KYBER NETWORK ROLESThere Kyber Network functions through coordination between several different roles and functions as explained below: - Users — This entity uses the Kyber Network to send and receive tokens. A user can be an individual, a merchant, and even a smart contract account. - Reserve Entities — This role is used to add liquidity to the platform through the dynamic reserve pool. Some reserve entities are internal to the Kyber Network, but others may be registered third parties. Reserve entities may be public if the public contributes to the reserves they hold, otherwise they are considered private. By allowing third parties as reserve entities the network adds diversity, which prevents monopolization and keeps exchange rates competitive. Allowing third party reserve entities also allows for the listing of less popular coins with lower volumes. - Reserve Contributors — Where reserve entities are classified as public, the reserve contributor is the entity providing reserve funds. Their incentive for doing so is a profit share from the reserve. - The Reserve Manager — Maintains the reserve, calculates exchange rates and enters them into the network. The reserve manager profits from exchange spreads set by them on their reserves. They can also benefit from increasing volume by accessing the entire Kyber Network. - The Kyber Network Operator — Currently the Kyber Network team is filling the role of the network operator, which has a function to adds/remove Reserve Entities as well as controlling the listing of tokens. Eventually, this role will revert to a proper decentralized governance.
1.6 BASIC TOKEN TRADEA basic token trade is one that has the quote token as either the source or destination token of the trade request. The execution flow of a basic token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for ETH as an example. The trade happens in a single blockchain transaction. 1. Taker sends 1 ETH to the protocol contract, and would like to receive BAT in return. 2. Protocol contract queries the first reserve for its ETH to BAT exchange rate. 3. Reserve 1 offers an exchange rate of 1 ETH for 800 BAT. 4. Protocol contract queries the second reserve for its ETH to BAT exchange rate. 5. Reserve 2 offers an exchange rate of 1 ETH for 820 BAT. 6. This process goes on for the other reserves. After the iteration, reserve 2 is discovered to have offered the best ETH to BAT exchange rate. 7. Protocol contract sends 1 ETH to reserve 2. 8. The reserve sends 820 BAT to the taker.
1.7 TOKEN-TO-TOKEN TRADEA token-to-token trade is one where the quote token is neither the source nor the destination token of the trade request. The exchange flow of a token to token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for DAI as an example. The trade happens in a single blockchain transaction. 1. Taker sends 50 BAT to the protocol contract, and would like to receive DAI in return. 2. Protocol contract sends 50 BAT to the reserve offering the best BAT to ETH rate. 3. Protocol contract receives 1 ETH in return. 4. Protocol contract sends 1 ETH to the reserve offering the best ETH to DAI rate. 5. Protocol contract receives 30 DAI in return. 6. Protocol contract sends 30 DAI to the user.
2.KYBER NETWORK CRYSTAL (KNC) TOKENKyber Network Crystal (KNC) is an ERC-20 utility token and an integral part of Kyber Network.
KNC is the first deflationary staking token where staking rewards and token burns are generated from actual network usage and growth in DeFi.
The Kyber Network Crystal (KNC) is the backbone of the Kyber Network. It works to connect liquidity providers and those who need liquidity and serves three distinct purposes. The first of these is to collect transaction fees, and a portion of every fee collected is burned, which keeps KNC deflationary. Kyber Network Crystals (KNC), are named after the crystals in Star Wars used to power light sabers.
The KNC also ensures the smooth operation of the reserve system in the Kyber liquidity since entities must use third-party tokens to buy the KNC that pays for their operations in the network.
KNC allows token holders to play a critical role in determining the incentive system, building a wide base of stakeholders, and facilitating economic flow in the network. A small fee is charged each time a token exchange happens on the network, and KNC holders get to vote on this fee model and distribution, as well as other important decisions. Over time, as more trades are executed, additional fees will be generated for staking rewards and reserve rebates, while more KNC will be burned. - Participation rewards — KNC holders can stake KNC in the KyberDAO and vote on key parameters. Voters will earn staking rewards (in ETH) - Burning — Some of the network fees will be burned to reduce KNC supply permanently, providing long-term value accrual from decreasing supply. - Reserve incentives — KNC holders determine the portion of network fees that are used as rebates for selected liquidity providers (reserves) based on their volume performance.
Finally, the KNC token is the connection between the Kyber Network and the exchanges, wallets, and dApps that leverage the liquidity network. This is a virtuous system since entities are rewarded with referral fees for directing more users to the Kyber Network, which helps increase adoption for Kyber and for the entities using the Network.
And of course there will soon be a fourth and fifth uses for the KNC, which will be as a staking token used to generate passive income, as well as a governance token used to vote on key parameters of the network.
The Kyber Network Crystal (KNC) was released in a September 2017 ICO at a price around $1. There were 226,000,000 KNC minted for the ICO, with 61% sold to the public. The remaining 39% are controlled 50/50 by the company and the founders/advisors, with a 1 year lockup period and 2 year vesting period.
Currently, just over 180 million coins are in circulation, and the total supply has been reduced to 210.94 million after the company burned 1 millionth KNC token in May 2019 and then its second millionth KNC token just three months later.
That means that while it took 15 months to burn the first million KNC, it took just 10 weeks to burn the second million KNC. That shows how rapidly adoption has been growing recently for Kyber, with July 2019 USD trading volumes on the Kyber Network nearly reaching $60 million. This volume has continued growing, and on march 13, 2020 the network experienced its highest daily trading activity of $33.7 million in a 24-hour period.
Currently KNC is required by Reserve Managers to operate on the network, which ensures a minimum amount of demand for the token. Combined with future plans for burning coins, price is expected to maintain an upward bias, although it has suffered along with the broader market in 2018 and more recently during the summer of 2019.
It was unfortunate in 2020 that a beginning rally was cut short by the coronavirus pandemic, although the token has stabilized as of April 2020, and there are hopes the rally could resume in the summer of 2020.
2.1 HOW ARE KNC TOKENS PRODUCED?The native token of Kyber is called Kyber Network Crystals (KNC). All reserves are required to pay fees in KNC for the right to manage reserves. The KNC collected as fees are either burned and taken out of the total supply or awarded to integrated dapps as an incentive to help them grow.
2.2 HOW DO YOU GET HOLD OF KNC TOKENS?Kyber Swap can be used to buy ETH directly using a credit card, which can then be used to swap for KNC. Besides Kyber itself, exchanges such as Binance, Huobi, and OKex trade KNC.
2.3 WHAT CAN YOU DO WITH KYBER?The most direct and basic function of Kyber is for instantly swapping tokens without registering an account, which anyone can do using an Etheruem wallet such as MetaMask. Users can also create their own reserves and contribute funds to a reserve, but that process is still fairly technical one–something Kyber is working on making easier for users in the future.
2.4 THE GOAL OF KYBER THE FUTUREThe goal of Kyber in the coming years is to solidify its position as a one-stop solution for powering liquidity and token swapping on Ethereum. Kyber plans on a major protocol upgrade called Katalyst, which will create new incentives and growth opportunities for all stakeholders in their ecosystem, especially KNC holders. The upgrade will mean more use cases for KNC including to use KNC to vote on governance decisions through a decentralized organization (DAO) called the KyberDAO.
With our upcoming Katalyst protocol upgrade and new KNC model, Kyber will provide even more benefits for stakeholders. For instance, reserves will no longer need to hold a KNC balance for fees, removing a major friction point, and there will be rebates for top performing reserves. KNC holders can also stake their KNC to participate in governance and receive rewards.
2.5 BUYING & STORING KNCThose interested in buying KNC tokens can do so at a number of exchanges. Perhaps your best bet between the complete list is the likes of Coinbase Pro and Binance. The former is based in the USA whereas the latter is an offshore exchange.
The trading volume is well spread out at these exchanges, which means that the liquidity is not concentrated and dependent on any one exchange. You also have decent liquidity on each of the exchange books. For example, the Binance BTC / KNC books are wide and there is decent turnover. This means easier order execution.
KNC is an ERC20 token and can be stored in any wallet with ERC20 support, such as MyEtherWallet or MetaMask. One interesting alternative is the KyberSwap Android mobile app that was released in August 2019.
It allows for instant swapping of tokens and has support for over 70 different altcoins. It also allows users to set price alerts and limit orders and works as a full-featured Ethereum wallet.
2.6 KYBER KATALYST UPGRADEKyber has announced their intention to become the de facto liquidity layer for the Decentralized Finance space, aiming to have Kyber as the single on-chain endpoint used by the majority of liquidity providers and dApp developers. In order to achieve this goal the Kyber Network team is looking to create an open ecosystem that garners trust from the decentralized finance space. They believe this is the path that will lead the majority of projects, developers, and users to choose Kyber for liquidity needs. With that in mind they have recently announced the launch of a protocol upgrade to Kyber which is being called Katalyst.
The Katalyst upgrade will create a stronger ecosystem by creating strong alignments towards a common goal, while also strengthening the incentives for stakeholders to participate in the ecosystem.
The primary beneficiaries of the Katalyst upgrade will be the three major Kyber stakeholders: 1. Reserve managers who provide network liquidity; 2. dApps that connect takers to Kyber; 3. KNC holders.
These stakeholders can expect to see benefits as highlighted below: Reserve Managers will see two new benefits to providing liquidity for the network. The first of these benefits will be incentives for providing reserves. Once Katalyst is implemented part of the fees collected will go to the reserve managers as an incentive for providing liquidity.
This mechanism is similar to rebates in traditional finance, and is expected to drive the creation of additional reserves and market making, which in turn will lead to greater liquidity and platform reach.
Katalyst will also do away with the need for reserve managers to maintain a KNC balance for use as network fees. Instead fees will be automatically collected and used as incentives or burned as appropriate. This should remove a great deal of friction for reserves to connect with Kyber without affecting the competitive exchange rates that takers in the system enjoy. dApp Integrators will now be able to set their own spread, which will give them full control over their own business model. This means the current fee sharing program that shares 30% of the 0.25% fee with dApp developers will go away and developers will determine their own spread. It’s believed this will increase dApp development within Kyber as developers will now be in control of fees.
KNC Holders, often thought of as the core of the Kyber Network, will be able to take advantage of a new staking mechanism that will allow them to receive a portion of network fees by staking their KNC and participating in the KyberDAO.
2.7 COMING KYBERDAOWith the implementation of the Katalyst protocol the KNC holders will be put right at the heart of Kyber. Holders of KNC tokens will now have a critical role to play in determining the future economic flow of the network, including its incentive systems.
The primary way this will be achieved is through KyberDAO, a way in which on-chain and off-chain governance will align to streamline cooperation between the Kyber team, KNC holders, and market participants.
The Kyber Network team has identified 3 key areas of consideration for the KyberDAO: 1. Broad representation, transparent governance and network stability 2. Strong incentives for KNC holders to maintain their stake and be highly involved in governance 3. Maximizing participation with a wide range of options for voting delegation
Interaction between KNC Holders & Kyber
This means KNC holders have been empowered to determine the network fee and how to allocate the fees to ensure maximum network growth. KNC holders will now have three fee allocation options to vote on: - Voting Rewards: Immediate value creation. Holders who stake and participate in the KyberDAO get their share of the fees designated for rewards. - Burning: Long term value accrual. The decreasing supply of KNC will improve the token appreciation over time and benefit those who did not participate. - Reserve Incentives:Value creation via network growth. By rewarding Kyber reserve managers based on their performance, it helps to drive greater volume, value, and network fees.
2.8 TRANSPARENCY AND STABILITYThe design of the KyberDAO is meant to allow for the greatest network stability, as well as maximum transparency and the ability to quickly recover in emergency situations. Initally the Kyber team will remain as maintainers of the KyberDAO. The system is being developed to be as verifiable as possible, while still maintaining maximum transparency regarding the role of the maintainer in the DAO.
Part of this transparency means that all data and processes are stored on-chain if feasible. Voting regarding network fees and allocations will be done on-chain and will be immutable. In situations where on-chain storage or execution is not feasible there will be a set of off-chain governance processes developed to ensure all decisions are followed through on.
2.9 KNC STAKING AND DELEGATIONStaking will be a new addition and both staking and voting will be done in fixed periods of times called “epochs”. These epochs will be measured in Ethereum block times, and each KyberDAO epoch will last roughly 2 weeks.
This is a relatively rapid epoch and it is beneficial in that it gives more rapid DAO conclusion and decision-making, while also conferring faster reward distribution. On the downside it means there needs to be a new voting campaign every two weeks, which requires more frequent participation from KNC stakeholders, as well as more work from the Kyber team.
Delegation will be part of the protocol, allowing stakers to delegate their voting rights to third-party pools or other entities. The pools receiving the delegation rights will be free to determine their own fee structure and voting decisions. Because the pools will share in rewards, and because their voting decisions will be clearly visible on-chain, it is expected that they will continue to work to the benefit of the network.
3. TRADINGAfter the September 2017 ICO, KNC settled into a trading price that hovered around $1.00 (decreasing in BTC value) until December. The token has followed the trend of most other altcoins — rising in price through December and sharply declining toward the beginning of January 2018.
The KNC price fell throughout all of 2018 with one exception during April. From April 6th to April 28th, the price rose over 200 percent. This run-up coincided with a blog post outlining plans to bring Bitcoin to the Ethereum blockchain. Since then, however, the price has steadily fallen, currently resting on what looks like a $0.15 (~0.000045 BTC) floor.
With the number of partners using the Kyber Network, the price may rise as they begin to fully use the network. The development team has consistently hit the milestones they’ve set out to achieve, so make note of any release announcements on the horizon.
4. COMPETITIONThe 0x project is the biggest competitor to Kyber Network. Both teams are attempting to enter the decentralized exchange market. The primary difference between the two is that Kyber performs the entire exchange process on-chain while 0x keeps the order book and matching off-chain.
As a crypto swap exchange, the platform also competes with ShapeShift and Changelly.
5.KYBER MILESTONES• June 2020: Digifox, an all-in-one finance application by popular crypto trader and Youtuber Nicholas Merten a.k.a DataDash (340K subs), integrated Kyber to enable users to easily swap between cryptocurrencies without having to leave the application. • June 2020: Stake Capital partnered with Kyber to provide convenient KNC staking and delegation services, and also took a KNC position to participate in governance. • June 2020: Outlined the benefits of the Fed Price Reserve (FPR) for professional market makers and advanced developers. • May 2020: Kyber crossed US$1 Billion in total trading volume and 1 Million transactions, performed entirely on-chain on Ethereum. • May 2020: StakeWith.Us partnered Kyber Network as a KyberDAO Pool Master. • May 2020: 2Key, a popular blockchain referral solution using smart links, integrated Kyber’s on-chain liquidity protocol for seamless token swaps • May 2020: Blockchain game League of Kingdoms integrated Kyber to accept Token Payments for Land NFTs. • May 2020: Joined the Zcash Developer Alliance , an invite-only working group to advance Zcash development and interoperability. • May 2020: Joined the Chicago DeFi Alliance to help accelerate on-chain market making for professionals and developers. • March 2020: Set a new record of USD $33.7M in 24H fully on-chain trading volume, and $190M in 30 day on-chain trading volume. • March 2020: Integrated by Rarible, Bullionix, and Unstoppable Domains, with the KyberWidget deployed on IPFS, which allows anyone to swap tokens through Kyber without being blocked. • February 2020: Popular Ethereum blockchain game Axie Infinity integrated Kyber to accept ERC20 payments for NFT game items. • February 2020: Kyber’s protocol was integrated by Gelato Finance, Idle Finance, rTrees, Sablier, and 0x API for their liquidity needs. • January 2020: Kyber Network was found to be the most used protocol in the whole decentralized finance (DeFi) space in 2019, according to a DeFi research report by Binance. • December 2019: Switcheo integrated Kyber’s protocol for enhanced liquidity on their own DEX. • December 2019: DeFi Wallet Eidoo integrated Kyber for seamless in-wallet token swaps. • December 2019: Announced the development of the Katalyst Protocol Upgrade and new KNC token model. • July 2019: Developed the Waterloo Bridge , a Decentralized Practical Cross-chain Bridge between EOS and Ethereum, successfully demonstrating a token swap between Ethereum to EOS. • July 2019: Trust Wallet, the official Binance wallet, integrated Kyber as part of its decentralized token exchange service, allowing even more seamless in-wallet token swaps for thousands of users around the world. • May 2019: HTC, the large consumer electronics company with more than 20 years of innovation, integrated Kyber into its Zion Vault Wallet on EXODUS 1 , the first native web 3.0 blockchain phone, allowing users to easily swap between cryptocurrencies in a decentralized manner without leaving the wallet. • January 2019: Introduced the Automated Price Reserve (APR) , a capital efficient way for token teams and individuals to market make with low slippage. • January 2019: The popular Enjin Wallet, a default blockchain DApp on the Samsung S10 and S20 mobile phones, integrated Kyber to enable in-wallet token swaps. • October 2018: Kyber was a founding member of the WBTC (Wrapped Bitcoin) Initiative and DAO. • October 2018: Developed the KyberWidget for ERC20 token swaps on any website, with CoinGecko being the first major project to use it on their popular site.
Current location based services have their limitations, but these new projects are leveraging blockchain technology to redefine how we navigate the world. Mapping on the Blockchain, Explained Some argue that if a high number of users start transacting tokenized BTC on the Ethereum blockchain, the transaction fees on the Bitcoin network could drop. Over the (very) long-term, Bitcoin is supposed to be supported by transaction fees only. If most of those flow into the Ethereum ecosystem, the security of the network could be compromised. However, this is a long way off and isn’t a ... Blockchain Oracles Explained. Intermediate. 1w ago. 6m. Community Submission - Author: Vallery Mou. What is a blockchain oracle? Blockchain oracles are third-party services that provide smart contracts with external information. They serve as bridges between blockchains and the outside world. Blockchains and smart contracts cannot access off-chain data (data that is outside of the network ... Binance to Launch Bitcoin-Pegged Token on Its Own Blockchain . Jun 18, 2019 at 13:30 UTC Updated Jun 18, 2019 at 13:35 UTC. Binance CEO Changpeng Zhao (Binance) Daniel Kuhn. Binance to Launch ... Binance Coin Fans. All about BNB. Skip to content. Blockchain Explained. Posted on November 10, 2020 November 10, 2020 by BNB Coin Fans. A blockchain is a common database, ledger, or database of financial transactions that are saved on multiple computers in different locations. The database grows constantly when new transactions or “blocks” are added to it. This forms a continuous chain of ... Getting Bitcoin blockchain explained is essential to understanding how blockchain works. The Bitcoin blockchain is a database ... The exchange platform (i.e. Binance) acts as a middleman - it connects you (your offer or request) with that other person (the seller or the buyer). With a brokerage, however, there is no “other person” - you come and exchange your crypto coins or fiat money ...
[index]          
Join Coinbase - $10 of Bitcoin with $100 investment - https://calcur.tech/coinbase Binance for trading cryptocurrency - https://calcur.tech/binance Have you ... SIX adding XRP, BTC LTC ETH CFDs, Blockchain Bank & Binance Upgrade The Modern Investor. Loading... Unsubscribe from The Modern Investor? Cancel Unsubscribe. Working... Subscribe Subscribed ... #binance #crypto #bitcoin Explaining the Bittrex and Binance ban from the US Where do you think the money will flow? Updates on technical and fundamental analysis to keep you on track with your ... To learn more about Blockchain and Cryptocurrency visit Binance Academy: https://www.binance.vision To trade over 100 different cryptocurrencies visit Binance Exchange: https://www.binance.com How to trade bitcoin futures on binance for beginners. Binance Bitcoin Futures Trading for Beginners EXPLAINED Join Binance https://www.binance.com/?ref=... What do you think about Binance Chain? Let's discuss! Special thanks to James Care for helping write this video. -----Binance Referral: https://goo.gl/RD7pLD $10 Of Free Bitcoin, Coinbase Referral ... In this lab we will look at the block chain real time. We will look at the genesis block, the first bitcoin block ever mined on the network and we will see what the transactions in the block look like